...MightyGPS.com - The Mighty marketplace for GPS solutions Home | Contact | Affiliate | ServiceResourcesVolume Discount
 PDA GPS | Laptop GPS | GPS Antennaes & Receivers | Maps | Tracking | Gear & Gadgets | Specials

bulk gps



corporate discounts Consumer/Corporate
   Volume Discounts

institutional discounts Institutional Discounts

private label program Private Label Program

oem gps OEM GPS

oem gps More OEM GPS

oem gps Commercial GPS

oem gps GPS System

volume purchase faq FAQ
 

Please note that inquiries via email will receive a faster response than those by phone.

 

OEM GPS SYSTEMS

For pricing and further information, please contact us at

All OEM GPS Antennas are available as volume purchases.  Please note that sample orders are available with a minimum of 10 units or greater. Please allow for 7 to 10 days lead time for sample delivery. 


active antenna
The P1 series active antennas contains a high performance GPS patch antenna and a high-tech low noise amplifier. The P1 series of active GPS antennas come with a variety of connectors (SMA, SMA reverse, MCX, MMCX and other by custom requests). They are also available at 3V and 5V to suit the operating voltages of Laipac’s GPS receivers. It provides excellent signal amplification and out-band-rejection for the receiver. All this is packaged into a low-profile, extremely compact and fully waterproof package.


P1 series antennas are also available without the plastic case.
GPS antennas come with a variety of connectors

This is perfect for OEM customers with applications requiring compact design. Standard version comes with 5 meter RF cable and magnet mount.

APPLICATIONS

Car Navigation
AVL and Vehicle Tracking
Handheld GPS
Avionics GPS




gps antenna
The GLP1-RA model, Capsule Compact Active Antenna is a high performance 5VDC GPS antenna, this compact size active antenna is commonly used for OEM, system integrator and end user applications. The antenna offers a 27 dB gain (active patch). It features a "bottom exit" coaxial cable configuration with a standard SMA connector. This antenna performs well in foliage, urban and noisy environments. It is designed for fixed location, permanent mount applications and complies with automotive temperature and vibration standards.
Custom designed antennas are available upon customers request. Price may vary depending on modification requirement.

Specifications:

Electrical:
Frequency: 1.575 GHz:t3MHz
OutputVSWR: 2.0 Max
Impedance: 50 D.
Gain: 27 dB Typical
Noise Figure:1.2dB
DC Voltage: DC 5.0V
DC Current: 22 mA Typical

Environmental:
Working Temp: - 40C - +8SoC
Weatherproof: 100% waterproof


Mechanical:
Size: 60 mm Diam. X 22 mm
Cable: RG 174 with 5 meter long
Connector: SMA or by selection

Mounting: Permanent mount




The GLP1-RA Plus model, Capsule Compact Active Antenna is a high performance GPS antenna, this compact size active antenna is commonly used for OEM, system integrator and end user applications. The plus version operates on 3 or 5VDC, it is also a little smaller than the standard version. The antenna offers a 27 dB gain (active patch). It features a "bottom exit" coaxial cable configuration with a standard SMA connector. This antenna performs well in foliage, urban and noisy environments. It is designed for fixed location, permanent mount applications and complies with automotive temperature and vibration standards.
Custom designed antennas are available upon customers request, a minimum of 100 units must be ordered to allow for custom design. Price may vary depending on modification requirements.
Capsule Compact Active Antenna

Specifications

Antenna:
Frequency: 1575i:3 MHz
VSWR: 1.5:1 .
Bandwidth: 10 MHz Min.
Impedance: 50 ohm
Peak Gain: 4 dBic Min.
Gain Coverage: G – 4 dBic at - 90 ~ B ~ 90
Power Handling: 1 watt
Polarization: RHCP
Amplifier Gain: 27dB (Typical)
Noise Figure: 1.5 dB (Typical)
Output VSWR: 2.0 Max
Filtering: -25 dB (::I::100 MHz)
DC Voltage: DC 3.0 to 5.0 V
DC Current: 22 mA Max

Environmental:
Working Temperature: -40C - +85C
Storage Temperature: - 40C - +85C
Vibration: Sine Sweep, IG (O-P), 10-150-10Hz each axis
Humidity: 95%-100%RH

Mechanical:
Weight: ~ 120 g.
Size: 55 mlriDIA. X 13 mm High
Cable: RG 174 with 5 meter long
Connector: SNA/MCX
Mounting: Thread permanent mount
Housing: Black
Weatherproof: 100% waterproof



GLP1-GC
This high performance, low-profile GPS/ GSM or AMPS antenna is one of our latest versions of a dual purpose mobile antenna. This model is commonly used for OEM, system integrator and end user applications. The combination of a high gain GPS antenna and -1 dBi GSM band antenna is ideal for those applications that require durability, small size, covert installation and rugged construction. The antenna offers a 27 dB gain (active patch). It features a "bottom exit" coaxial cable configuration with a standard SMA connector. This antenna performs well in foliage, urban and noisy environments. It is specifically designed for fixed location, permanent mount applications. These antennas are waterproof and comply with automotive temperature and vibration standards.
It comes standard with a 5 meter cable, operates on 3-5VDC and has SMA connector. Custom design versions are available for minimum orders of 100 units.

Specifications:
low-profile GPS/ GSM or AMPS antenna
Antenna:
Frequency: 1575GHz
VSWR: 1.5 : 1 Max.
Bandwidth: 10MHz Min.
Impedance: 50 ohms
Gain: 27dB typical w/o cable
Noise Figure: 1.2 dB Typical
Filtering: -25 dB (:t 100 MHz)
DC Voltage: DC 3 or 5 VDC
DC Current: 25 mA typical

Cellular Antenna:
Frequency: 880~960 MHz (GSM) or AMPS, ETACS, SMR system 2.0 : 1
Impedance: 50 ohm
Pattern Type : Omni-direction

Mechanical:
Size: ~320 grams
100mmDia. X39mm
RG 174 for GPS
For Cellular SMA for GPS SMA for Cellular, Magnetic base or Permanent mount

Environmental:
Temperature: -40C to +85C
100% waterproof



GLP1-CA
This low-profile GPS / GSM or AMPS antenna is one of our latest versions of a dual purpose mobile antenna. It comes standard with a 5 meter cable, operates on 3-5VDC and has SMA connector. Custom design versions are available for minimum orders of 100 units.
The combination of a high gain GPS antenna and -1 dBi GSM band antenna is ideal for those applications that require durability, small size, covert installation and rugged construction. This antenna is specifically designed for fixed location, permanent mount applications. These antennas are waterproof and comply with automotive temperature and vibration standards.
dual purpose mobile antenna


Specifications

Antenna:
o Frequency: 1575::1::3 MHz
o VSWR: 2.0 Max.
o Bandwidth: 10MHz Min.
o Impedance: 50 .0.
o Peak Gain: 4 dBic Min.
o Gain Coverage: G;-4 dBic at - 900 ~ (J ~90 (over 75% volume)
o Power Handling: 1 watt
o Polarization: RHCP
o Amplifier Gain without cable 27dB Typical
o Noise Figure: 1.5 dB Typical
o Output VSWR 2.0 Max.
o Filtering: -25 dB (::I:: 100 MHz)
o DC Voltage: DC 3 to 5 V
o DC Current: 22 mA Max.

Dipole Antenna:
o Frequency: 824 - 894 MHz
o VSWR: 2.0 : 1
o Impedance: 50.0.
o Peak Gain: 3 dBd Min.
o Polarization: Linear
o Pattern Type: Omni-direction

Mechanical:
o Weight: ~ 380 gram
o Size: 86X60X26 mm (without dipole antenna) 86X60X303 mm (with dipole antenna)
o Cable: GPS: RG - 174/U with 5 meter long, Cellular: RG-58/U with 5 meter long
o Connector: GPS: SMA (plug) , Cellular: TNC (plug)
o Mounting: Thread permanent mount
o Housing Color: Black

Environmental:
* Working Temp.: -400 C - +850 C
* Storage Temp.: -400 C - +850 C
* Vibration: Sine sweep, IG (0-P),10-150-10Hz each axis Humidity: 95% -100% RH
* Weatherproof: 100%waterproof



GLP1-SB
This Marine GPS System was designed to provide a low cost alternative for Marine GPS applications. It is supplied complete with a GPS receiver module and an active GPS antenna within the enclosure. It has an RS-232 output for connection to a PC or navigation system and is enclosed in a 100% waterproof, pole mount case.

The NMEA RS-232 interface provides an easy connection to a PC to translate and process the GPS strings.

Specifications:
Marine GPS System

Acquisition time:
o Warm Start : ء15 seconds
o Cold Start : ء2.0 minutes

Navigational Accuracies:
o 25meters CEP and 50meters 2dRMS (full accuracy C/A)
o 50meters CEP and 100meters 2dRMS (standard positioning service, SA on)

Output:
o Position, velocity, heading and time.
o Carrier-to-Noise ratio for all tracked satellites

Interfaces:
o One serial interface. NMEA-0183 sentences.

Physical Characteristics:
o Dimension : 130mm dia.x90.5mm
o Cable : 24AWG cable
o Mounting : pole mount base

Environmental:
o Operating Temp : -20XC~+85XC
o Storage Temp : -40XC~+85XC
o Weatherproof : 100%waterproof

Power Requirements:
o Supply Voltage : 12 to 24 VDC unregulated
o Power consumption : 2 W @12VDC